Presented by Envalior (a combination of DSM Engineering Materials and LANXESS High Performance Materials)
Recorded on September 19, 2023
Today, PPS is trusted by industry-leading manufacturers and Tier1s worldwide in offering the lowest ion leaching and best strength and toughness retention in hydrolytic environment to ensure fuel cell systems are efficient, have a long life, and are safe and reliable.
During this techtalk you will learn more from our experts about:
- Mechanism including data that show how leached ions from thermoplastic construction materials used in e.g. manifold and end-plate of a fuel cell affect the power output of the fuel cell.
- The interplay between ion leaching and the retention of the mechanical properties of PPS grades upon hydrolysis
- Envalior’s activity to detect, control and measure the effect of Volatile Organic Compound (VOC) emissions from the thermoplastics used.
Listen to our techtalk and learn from our experts how you can maximize the performance of your fuel cell systems and meet the high safety standards.
Watch the Webinar Recording
Contact Dr. Rob Janssen / Ask a Question
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL Solutions. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL Solutions or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL Solutions or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL Solutions does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL Solutions does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.