Recorded February 13, 2019
Presented by Evonik
Productivity, high carbamation resistance and excellent aesthetics, in a nut-shell, are three key drivers in concrete floor coatings; even better if such a coating meets the specified low emission requirement. In a typical two-coat floor system, cure speed of the primer is critical for applicators who want to apply both coatings on the same work day. It is equally critical, if not even more, to job specifiers or end-users who demand a minimum downtime. With limited solutions available, often the industry uses fast cure Mannich base technology in primers, despite its limited carbamation resistance and UV durability. This combination of market drivers remains a challenge and solutions are in high demand by industry coating formulators, applicators and end-users.
With the above drivers in mind, Anquamine® 728 curing agent was developed to deliver a solution: a primer (or pigmented coating) with a recoat time less than four hours at 10 °C (50 °F); high resistance to carbamation and waterspotting; excellent aesthetics; and potential to meet low emission requirements. In addition, new waterborne Anquamine® 728 based coatings can be applied up to 500 g/m2 (20 mils) wet film thickness without compromising cure speed. This webinar will demonstrate the performance advantages of Anquamine® 728 and how it can help you to formulate your one-day floor system, and get business back in service fast, every time.
Download the slides
Contact the Presenters / Ask a Question
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.
3 Responses to “Unrivaled Cure Speed and Excellent Aesthetics Brings a New Dimension to Fast Return to Service in Concrete Flooring”
Thank you for your valuable resources keep share the information like this…
Thank you for the webinar. Where can we download the presentation?
Thank you for your interest in Evonik’s webinar. Once the presentation is ready, you will receive an email with a link to the recording.