Recorded Thursday, May 4- Presented by EPS Materials
The use of low-VOC capable, all-acrylic binders in gloss consumer paints is common; however, they are less frequently used in high-traffic commercial and institutional coatings due to poor chemical and abrasion resistance. EPS® 2799 has been developed to match or surpass a single-component, pre-catalyzed water-borne epoxy for chemical and cleaner resistance in the institutional space. It also excels in abrasion resistance and other hardness properties in the architectural space. Not only does EPS® 2799 excel in hardness and resistance properties, it has versatility in ease of formulation in which simple drop-ins are typical over a wide-range of sheens. Delivering ultimate performance, EPS® 2799 offers versatility over a wide application space.
Download the slides (for Prospector Members only) | Webinar Transcript (coming soon!)
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL Solutions. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL Solutions or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL Solutions or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL Solutions does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL Solutions does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.
Leave a Reply or Comment