Recorded Monday, July 27th at 11AM EDT –
Presented by Proto Labs
After developing a prototype through additive manufacturing (3D printing) or CNC machining, the next step is often low-volume injection molding. In this webinar, you’ll get an overview of the different 3D printing, CNC machining and injection molding processes. You’ll learn about important design considerations for molding — such as draft and uniform wall thickness — which will better prepare you for an eventual transition from 3D printing to injection molding.
Download the slides
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.
Depending on what you are making, you might want to think about making the move to injection molding. This is where there is a mold of what you want to make, and the material is injected into the mold with heat. This is also a quicker process than 3D printing. I really liked in the video where you explained the difference between injection molding and 3D printing and their benefits and drawbacks.