Presented by Arkema
Recorded on June 22, 2022
- Key advantages of the solvent-free UV and LED technologies: energy, time, space and money savings
- Latest innovations for low energy LED curing: self initiating resins introduction
- Renewable based UV resins possibilities
The key advantages of UV/LED curing as solvent free technologies will be featured. Sartomer® resins and photoinitiators latest developments for LED curing, with the introduction of new self initiating resins, will be featured. Ways to substitute the use of substances of concern and the anticipation of future regulations will be discussed. Finally, the Sarbio® renewable based UV resins, enabling to combine a no-VOC technology together with alternative feed-stock solutions will be presented.
Request Webinar Recording
Contact Xavier Drujon / Ask a Question
This webinar is part of a series of six webinars. To see the additional webinars in this series, please click the button below.
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.